Experimental analysis of elastic and plastic behavior in ductile-regime machining of glass quartz utilizing a diamond tool

Ju N.Ichi Tamaki, Akihiko Kubo, Jiwang Yan

研究成果: Article査読

4 被引用数 (Scopus)

抄録

The elastic and/or plastic behaviors of glass quartz, the most popular optical material and a hard and brittle material, were studied experimentally from two points of view; static mode and dynamic mode. The static behaviors were investigated by a nanoindentation test and the dynamic behaviors were investigated by a single-point fly cutting (SPFC) test. In the experiments, copper was selected as a material representing soft and ductile materials. From the experiments it was found that the plastic deformation ratio of glass quartz is smaller than that of copper depending on the SPFC conditions, and the area coefficient of the pile-up has the same tendency for both glass quartz and copper.

本文言語English
ページ(範囲)30-35
ページ数6
ジャーナルKey Engineering Materials
389-390
出版ステータスPublished - 2009 1 1
外部発表はい

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Experimental analysis of elastic and plastic behavior in ductile-regime machining of glass quartz utilizing a diamond tool」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル