Finite-Element Analysis of the Rotor/Stator Contact in a Ring-Type Ultrasonic Motor

Takashi Maeno, Takayuki Tsukimoto, Akira Miyake

研究成果: Article査読

181 被引用数 (Scopus)

抄録

A new way to understand mechanical characteristics of an ultrasonic motor by using a finite-element (FE) analysis is presented. First, the vibration mode of a stator by using a finite-element method (FEM) code is calculated. The path of the elliptic motion of the stator's teeth is obtained. The computed vibration mode at the surface of the stator is compared with the measured one by using an electrooptical displacement transducer. Next, the contact condition of the rotor/stator is calculated. The stick/slip behavior at the contact interface of the rotor/stator is taken into account. The displacement and velocity of the rotor/stator, the distribution of the stick/slip area, the rotational speed of the rotor, and the friction loss of the motor are obtained. The calculated rotor displacement and torque-rotational speed (T-N) curve correspond closely to the experimentally measured ones. Furthermore, an internal loss of the rotor/stator and the loss of the supporting felt is measured. The total loss of the motor obtained by adding the aforementioned losses and the calculated friction loss agree with the measured total loss. The calculated and the measured efficiency of the motor also agree.

本文言語English
ページ(範囲)668-674
ページ数7
ジャーナルIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
39
6
DOI
出版ステータスPublished - 1992 11月
外部発表はい

ASJC Scopus subject areas

  • 器械工学
  • 音響学および超音波学
  • 電子工学および電気工学

フィンガープリント

「Finite-Element Analysis of the Rotor/Stator Contact in a Ring-Type Ultrasonic Motor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル