Force servoing by flexible manipulator based on resonance ratio control

Seiichiro Katsura, Kouhei Ohnishi

研究成果: Article査読

99 被引用数 (Scopus)

抄録

This paper presents a force servoing method to suppress torsional vibration of two-mass resonant system. The resonance ratio control is one of the effective control methods of two-mass resonant system. In this method, the ratio between the resonant frequency of motor and arm is determined arbitrary according to the feedback of estimated reaction torque. The reaction torque is estimated by using a position sensitive detector (PSD). Since the estimation method does not need the parameter identification, the torsion information is obtained with accuracy. To attain the affinity and adaptability to environment, motion systems should control the reaction torque from the environment. In the force servoing system, the force command is given as a disturbance of the arm portion. The arm disturbance is observed by the arm disturbance observer without force sensors. The proposed force servoing system is based on both the conventional PD control and the resonance ratio control, and the determination method of pole placement is discussed. The proposed force servoing system can realize both the suppression of the inner torsional reaction torque and the adaptation to unknown outer force inputs. The numerical and experimental results show the viability of the proposed method.

本文言語English
ページ(範囲)539-547
ページ数9
ジャーナルIEEE Transactions on Industrial Electronics
54
1
DOI
出版ステータスPublished - 2007 2月
外部発表はい

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「Force servoing by flexible manipulator based on resonance ratio control」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル