Formation of anatase porous ceramics by hydrothermal hot-pressing of amorphous titania spheres

Kazumichi Yanagisawa, Koji Ioku, Nakamichi Yamasaki

研究成果: Article査読

44 被引用数 (Scopus)

抄録

Anatase porous ceramics were produced at low temperatures below 350°C by hydrothermal hot-pressing of amorphous titania consisting of spherical particles prepared by hydrolysis of titanium tetraethoxide. After fine anatase crystals were formed in the original amorphous spheres by hydrothermal hot-pressing, the spherical particles were deformed and the fine anatase crystals flowed into the interstices among the original spheres by compression from outside the autoclave to form a compact with homogeneous distribution of fine pores. The fine anatase crystals in the compacts were bonded together by dissolution and deposition to form a compact with high mechanical strength. The porous anatase ceramics with open pores were prepared by drying in air after removing water which had occupied the pores in the compacts during hydrothermal hot-pressing.

本文言語English
ページ(範囲)1303-1306
ページ数4
ジャーナルJournal of the American Ceramic Society
80
5
DOI
出版ステータスPublished - 1997 5月
外部発表はい

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 材料化学

フィンガープリント

「Formation of anatase porous ceramics by hydrothermal hot-pressing of amorphous titania spheres」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル