Frame transmission time control for TDMA-based ethernet

Naoto Hagino, Masaaki Yamamoto, Takahiro Yakoh

研究成果: Conference contribution

1 被引用数 (Scopus)

抄録

Processes of network-based control system require accurate timing control of frame transmission. A special network interface card (NIC) was proposed and implemented to adjust the timing accurately based on a dual queue structure and precise time synchronization mechanism in this paper. A high resolution measurement tool for frame transmission latency was also developed to validate the implementation. The measured results verified that the proposed NIC achieved the latency shorter than 790 ns and the deviation of it less than 49 ns while a commercial off-the-shelf NIC showed the latency longer than 9700 ns and the deviation of it more than 300 ns.

本文言語English
ホスト出版物のタイトルWFCS 2018 - 2018 14th IEEE International Workshop on Factory Communication Systems
出版社Institute of Electrical and Electronics Engineers Inc.
ページ1-8
ページ数8
ISBN(電子版)9781538610664
DOI
出版ステータスPublished - 2018 7月 3
イベント14th IEEE International Workshop on Factory Communication Systems, WFCS 2018 - Imperia, Italy
継続期間: 2018 6月 132018 6月 15

出版物シリーズ

名前IEEE International Workshop on Factory Communication Systems - Proceedings, WFCS
2018-June

Other

Other14th IEEE International Workshop on Factory Communication Systems, WFCS 2018
国/地域Italy
CityImperia
Period18/6/1318/6/15

ASJC Scopus subject areas

  • 電子工学および電気工学
  • 産業および生産工学

フィンガープリント

「Frame transmission time control for TDMA-based ethernet」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル