Frequency response of IPMC actuator with palladium electrode

T. Kobayashi, M. Omiya

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

The present study investigates the frequency response of IPMC actuator. By using the electroless plating method, IPMC actuator with palladium electrode was obtained in 60 minutes, which was shorter than the conventional fabrication time. In the observation of response to step voltages, IPMC actuator with palladium electrode showed larger deformation and slower backward motion than the conventional IPMC actuators with platinum electrode. In the experiments of frequency response, IPMC actuator showed the resonance phenomenon at a specified frequency, and the resonance frequency could be predicted by the simple cantilever beam model. Then, the phase shift increased drastically when the resonance phenomena were observed. Finally, the frequency response of IPMC actuator was modeled by using the transfer function.

本文言語English
ホスト出版物のタイトルElectroactive Polymer Actuators and Devices (EAPAD) 2011
DOI
出版ステータスPublished - 2011 5月 17
イベントElectroactive Polymer Actuators and Devices (EAPAD) 2011 - San Diego, CA, United States
継続期間: 2011 3月 72011 3月 10

出版物シリーズ

名前Proceedings of SPIE - The International Society for Optical Engineering
7976
ISSN(印刷版)0277-786X

Other

OtherElectroactive Polymer Actuators and Devices (EAPAD) 2011
国/地域United States
CitySan Diego, CA
Period11/3/711/3/10

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • コンピュータ サイエンスの応用
  • 応用数学
  • 電子工学および電気工学

フィンガープリント

「Frequency response of IPMC actuator with palladium electrode」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル