High-density wiring of polymer optical waveguides fabricated using a microdispenser

Daisuke Suganuma, Takaaki Ishigure

研究成果: Conference contribution

3 被引用数 (Scopus)

抄録

Single-mode polymer optical waveguides with circular cores are successfully fabricated using the Mosquito method. Furthermore, fabrication conditions for densely aligned waveguides having graded-index circular cores with a 25-μm diameter are also investigated, in which the inter-channel pitch is reduced to 60 μm. By applying the three-dimensional (3-D) alignment conditions with the Mosquito method, fan-out waveguides are fabricated: three cores are obliquely aligned with a 40-μm pitch, while at the other end, the three cores are horizontally aligned in line with a 250-μm pitch. The insertion loss as low as 2.85 dB at 850-nm wavelength is observed for a 10-cm long fan-out waveguide.

本文言語English
ホスト出版物のタイトル2014 International Conference on Electronics Packaging, ICEP 2014
出版社IEEE Computer Society
ページ689-693
ページ数5
ISBN(印刷版)9784904090107
DOI
出版ステータスPublished - 2014 1 1
イベント2014 International Conference on Electronics Packaging, ICEP 2014 - Toyama, Japan
継続期間: 2014 4 232014 4 25

出版物シリーズ

名前2014 International Conference on Electronics Packaging, ICEP 2014

Other

Other2014 International Conference on Electronics Packaging, ICEP 2014
国/地域Japan
CityToyama
Period14/4/2314/4/25

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料

フィンガープリント

「High-density wiring of polymer optical waveguides fabricated using a microdispenser」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル