High-pressure acceleration of nanoliter droplets in the gas phase in a microchannel

Yutaka Kazoe, Ippei Yamashiro, Kazuma Mawatari, Takehiko Kitamori

研究成果: Article査読

4 被引用数 (Scopus)

抄録

Microfluidics has been used to perform various chemical operations for pL-nL volumes of samples, such as mixing, reaction and separation, by exploiting diffusion, viscous forces, and surface tension, which are dominant in spaces with dimensions on the micrometer scale. To further develop this field, we previously developed a novel microfluidic device, termed a microdroplet collider, which exploits spatially and temporally localized kinetic energy. This device accelerates a microdroplet in the gas phase along a microchannel until it collides with a target. We demonstrated 6000-fold faster mixing compared to mixing by diffusion; however, the droplet acceleration was not optimized, because the experiments were conducted for only one droplet size and at pressures in the 10-100 kPa range. In this study, we investigated the acceleration of a microdroplet using a high-pressure (MPa) control system, in order to achieve higher acceleration and kinetic energy. The motion of the nL droplet was observed using a high-speed complementary metal oxide semiconductor (CMOS) camera. A maximum droplet velocity of ~5 m/s was achieved at a pressure of 1-2 MPa. Despite the higher fluid resistance, longer droplets yielded higher acceleration and kinetic energy, because droplet splitting was a determining factor in the acceleration and using a longer droplet helped prevent it. The results provide design guidelines for achieving higher kinetic energies in the microdroplet collider for various microfluidic applications.

本文言語English
論文番号142
ジャーナルMicromachines
7
8
DOI
出版ステータスPublished - 2016 8 15
外部発表はい

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「High-pressure acceleration of nanoliter droplets in the gas phase in a microchannel」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル