Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid

Qianzhi Wang, Fei Zhou, Zhifeng Zhou, Lawrence Kwok Yan Li, Jiwang Yan

研究成果: Article査読

23 被引用数 (Scopus)

抄録

CrCN coatings with various carbon contents were deposited on 316L stainless steel disks by unbalanced magnetron sputtering via adjusting carbon target current, and their relevant microstructure was characterized by Raman spectrum and X-ray photoelectron spectroscopy, respectively. The influence of carbon content on the electrochemical properties of CrCN coatings in simulated body fluid (SBF) was investigated using open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests. It turned out that the CrCN-coated 316L disks performed better electrochemical properties than uncoated 316L disk. All CrCN coatings contained a-CNx, but the bonding structure converted from N-C bonds to NC bonds as carbon content increased. As a result, the CrCN coatings (52.6-75.0at.% C) with NC bonds were prone to be easily degraded by breakage of π bond. In contrast, the CrCN coatings (15.4at.% C) with N-C bond alone exhibited relatively higher charge transfer resistance (Rct), and was able to prolong the longevity of prosthesis.

本文言語English
ページ(範囲)16-23
ページ数8
ジャーナルSurface and Coatings Technology
265
DOI
出版ステータスPublished - 2015 3月 15

ASJC Scopus subject areas

  • 化学 (全般)
  • 凝縮系物理学
  • 表面および界面
  • 表面、皮膜および薄膜
  • 材料化学

フィンガープリント

「Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル