Influence of rubber content on failure mode and resistance characteristics of pc/abs blends and their abs constituents under impact

M. N.I.Z.A.R. Machmud, Omiya Masaki, Inoue Hirotsugu, Kishimoto Kikuo

研究成果: Conference contribution

抄録

This present study has been re-established to investigate failure mode and resistance characteristics of the PC/ABS blends and their ABS constituents under impact for a range of rubber contents. This present study has still been experimentally performed under an instrumented-drop weight impact test (DWIT) at a room temperature. It has been finally revealed that with a particular size of rubber particle, content of rubber significantly influenced impact failure modes and impact resistances of the PC/ABS blends and their ABS constituents as well. The test results showed that impact strength of the blends was improved about 23.22% and 155.33% due to increase in content of rubber up to 15 wt% and 20 wt%, respectively. There was also found that an increase in impact toughness of the blends for 57.48% and 239.23% was due to increase in content of rubber up to 15 wt% and 20 wt%, respectively. Whilst, impact strength of the ABS was improved about 392.98% and 190.12% due to increase in content of rubber up to 15 wt% and 20 wt%, respectively. An increase in impact toughness of the ABS for 308.20% and 172.56% was due to increase in content of rubber up to 15 wt% and 20 wt%, respectively.

本文言語English
ホスト出版物のタイトルAdvanced Technologies in Material Processing II
編集者 Akhyar, Mohd Iqbal
出版社Trans Tech Publications Ltd
ページ67-73
ページ数7
ISBN(印刷版)9783035718539
DOI
出版ステータスPublished - 2021
イベント2nd International Conference on Experimental and Computational Mechanic in Engineering, ICECME 2020 - Banda Aceh, Indonesia
継続期間: 2020 10月 132020 10月 14

出版物シリーズ

名前Key Engineering Materials
892 KEM
ISSN(印刷版)1013-9826
ISSN(電子版)1662-9795

Conference

Conference2nd International Conference on Experimental and Computational Mechanic in Engineering, ICECME 2020
国/地域Indonesia
CityBanda Aceh
Period20/10/1320/10/14

ASJC Scopus subject areas

  • 材料科学(全般)
  • 材料力学
  • 機械工学

フィンガープリント

「Influence of rubber content on failure mode and resistance characteristics of pc/abs blends and their abs constituents under impact」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル