Integrated silicon photonic wavelength-selective switch using wavefront control waveguides

Fumi Nakamura, Kyosuke Muramatsu, Keijiro Suzuki, Ken Tanizawa, Minoru Ohtsuka, Nobuyuki Yokoyama, Kazuyuki Matsumaro, Miyoshi Seki, Keiji Koshino, Kazuhiro Ikeda, Shu Namiki, Hitoshi Kawashima, Hiroyuki Tsuda

研究成果: Article査読

13 被引用数 (Scopus)

抄録

A wavelength selective switch (WSS) can route optical signals into any of output ports by wavelength, and is a key component of the reconfigurable optical add/drop multiplexer. We propose a wavefront control type WSS using silicon photonics technology. This consists of several arrayed waveguide gratings sharing a large slab waveguide, wavefront control waveguides and distributed Bragg reflectors. The structure, design method, operating principle, and scalability of the WSS are described and discussed. We designed and fabricated a 1 × 2 wavefront control type WSS using silicon waveguides. This has 16 channels with a channel spacing of 200 GHz. The chip size is 5 mm × 10 mm. The switching operation was achieved by shifting the phase of the light propagating in each wavefront control waveguide, and by controlling the propagation direction in the shared large slab waveguide. Our WSS has no crossing waveguide, so the loss and the variation in loss between channels were small compared to conventional waveguide type WSSs. The heater power required for switching was 183 mW per channel, and the average extinction ratios routed to Output#1 and Output#2 were 9.8 dB and 10.2 dB, respectively.

本文言語English
ページ(範囲)13573-13589
ページ数17
ジャーナルOptics Express
26
10
DOI
出版ステータスPublished - 2018 5月 14

ASJC Scopus subject areas

  • 原子分子物理学および光学

フィンガープリント

「Integrated silicon photonic wavelength-selective switch using wavefront control waveguides」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル