Interfacial tension between decane saturated with methane and water from 283.2 K to 298.2 K under pressures upto 10 MPa

Masamichi Kodera, Kosuke Watanabe, Maxence Lassiège, Saman Alavi, Ryo Ohmura

研究成果: Article

抜粋

Interfacial tension is one of the most important physical properties for high-precision simulations to develop the methods of preventing plugging of pipelines in the oil and natural gas industry. This paper reports experimental data with the pendant drop method for the interfacial tension of a decane + methane + water system at temperatures between 278.2 K to 298.2 K and pressures up to 10 MPa. The data show that in this temperature range the interfacial tension in the decane + methane + water system decreases almost linearly with increasing temperature. The results also show that by increasing the pressure of methane, the interfacial tension decreases from 53.98 mN m−1 to 50.23 mN m−1 at 283.2 K and 52.23 mN m−1 to 49.74 mN m−1 at 288.2 K. The nature of the methane pressure dependence of the interfacial tension changes for pressures above around 2.00 MPa. The interfacial tension decreases with the pressure up to 2.00 MPa, but has no pressure dependence above 2.00 MPa. It may be inferred that the decane/water interface is saturated with methane at pressures around 2.00 MPa and at higher pressure the interfacial tension is no longer affected by the presence of methane.

元の言語English
ページ(範囲)360-366
ページ数7
ジャーナルJournal of Industrial and Engineering Chemistry
81
DOI
出版物ステータスPublished - 2020 1 25

ASJC Scopus subject areas

  • Chemical Engineering(all)

フィンガープリント Interfacial tension between decane saturated with methane and water from 283.2 K to 298.2 K under pressures upto 10 MPa' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用