Laser assist powder jet deposition

Nobuhito Yoshihara, Ryoko Hiromatsu, Koichi Mizutani, Jiwang Yan, Tsunemoto Kuriyagawa

研究成果: Conference contribution

1 引用 (Scopus)

抜粋

Amorphous NiP plate is used as a mold of precision optical parts owing to the superior machinability. In the amorphous NiP plate, some pores, whose diameter is about 100μm, are generated occasionally. At present, the amorphous NiP plates with pore are rejected. However, because size of the mold becomes large in recent years, the possibility of pores becomes high. In addition, the cost of the amorphous NiP plate also becomes high. Therefore, reparation method of the pore in the amorphous NiP plate should be developed. In this paper, laser assist powder jet deposition is proposed as a reparation method of the amorphous NiP plate. And fundamental experiments are carried out

元の言語English
ホスト出版物のタイトルAdvances in Abrasive Technology XIII
ページ58-63
ページ数6
DOI
出版物ステータスPublished - 2010 12 1
外部発表Yes
イベント13th International Symposium on Advances in Abrasive Technology, ISAAT2010 - Taipei, Taiwan, Province of China
継続期間: 2010 9 192010 9 22

出版物シリーズ

名前Advanced Materials Research
126-128
ISSN(印刷物)1022-6680

Other

Other13th International Symposium on Advances in Abrasive Technology, ISAAT2010
Taiwan, Province of China
Taipei
期間10/9/1910/9/22

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント Laser assist powder jet deposition' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Yoshihara, N., Hiromatsu, R., Mizutani, K., Yan, J., & Kuriyagawa, T. (2010). Laser assist powder jet deposition. : Advances in Abrasive Technology XIII (pp. 58-63). (Advanced Materials Research; 巻数 126-128). https://doi.org/10.4028/www.scientific.net/AMR.126-128.58