Limit and plastic collapse loads for un-reinforced mitred bends under pressure and bending

Sung Hwan Min, Jun Young Jeon, Kuk Hee Lee, Yun Jae Kim, Peter J. Budden

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Approximate limit and plastic collapse load solutions for un-reinforced mitred bends under internal pressure and under bending are proposed in this paper, based on three-dimensional finite element analysis and approximate solutions for smooth bends. Solutions are given for single- and multi-mitred bends (mainly for single and double segmented bends) with the pipe mean radius-to-thickness ratio (r/t) ranging from r/t = 5 to r/t = 50, and the bend radius-to-mean radius ratio (R/r) from R/r = 2 to R/r = 4. Internal pressure, in-plane bending and out-of-plane bending loads are considered, but not their combination. It is found that the essential features of limit and plastic collapse loads for mitred bends are similar to those for smooth bends, and thus existing solutions for smooth elbows can be used to construct limit loads and plastic collapse for mitred bends.

本文言語English
ページ(範囲)482-494
ページ数13
ジャーナルInternational Journal of Pressure Vessels and Piping
88
11-12
DOI
出版ステータスPublished - 2011 12
外部発表はい

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Limit and plastic collapse loads for un-reinforced mitred bends under pressure and bending」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル