Microstructure and mechanical properties of hydroxyapatite ceramics with zirconia dispersion prepared by post-sintering

Koji Ioku, Masahiro Yoshimura, Shigeyuki Somiya

研究成果: Article

82 引用 (Scopus)

抜粋

Hydroxyapatite ceramics with zirconia dispersion from fine powders synthesized hydrothermally were post-sintered at 1000-1300°C under 200 M Pa of argon for 1 h without capsules, after normal sintering in air at 1200°C for 3 h. Densification was most significant with post-sintering at 1200°C. Fracture toughness, Vickers hardness and elastic properties of these materials were investigated. Post-sintering gave twice the K1c value of transparent pure hydroxyapatite ceramics. Vickers hardness and Young's modulus of the ceramics were increased by post-sintering.

元の言語English
ページ(範囲)57-61
ページ数5
ジャーナルBiomaterials
11
発行部数1
DOI
出版物ステータスPublished - 1990 1
外部発表Yes

ASJC Scopus subject areas

  • Bioengineering
  • Ceramics and Composites
  • Biophysics
  • Biomaterials
  • Mechanics of Materials

フィンガープリント Microstructure and mechanical properties of hydroxyapatite ceramics with zirconia dispersion prepared by post-sintering' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用