Nanosecond laser ablation of AlN ceramic

N. Nedyalkov, A. Dikovska, L. Aleksandrov, M. Terakawa

研究成果: Article査読

1 被引用数 (Scopus)

抄録

In this work, the ablation rate and surface modifications are studied of aluminum nitride ceramic treated by a pulsed nanosecond Nd:YAG laser at four wavelengths—266 nm, 355 nm, 532 nm, and 1064 nm. The ablation depth is presented as a function of the laser fluence and the number of pulses applied. A decrease of the ablation efficiency with the increase of both laser fluence and number of pulses is observed for all wavelengths used. It is found that the laser treatment leads to the formation of a variety of micro and nanostructures on the surface of the material that are strongly dependent on the processing conditions. The laser ablation at the fundamental wavelength leads to the appearance of periodic structures on the surface. Such effect is not observed for the other wavelengths used. It is further found that the laser processing also leads to the formation a conductive layer for all wavelengths. Using a model based on the heat diffusion equation that takes into account the process of ceramic decomposition, the ablation dynamics is followed, and the dependence of the surface layers thickness on the processing conditions is estimated. The results obtained are used to explain the experimentally observed dependences.

本文言語English
論文番号951
ジャーナルApplied Physics A: Materials Science and Processing
127
12
DOI
出版ステータスPublished - 2021 12月

ASJC Scopus subject areas

  • 化学 (全般)
  • 材料科学(全般)

フィンガープリント

「Nanosecond laser ablation of AlN ceramic」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル