Nonlinear finite element modeling of large deformation of nanobeams

Seyyed Mohammad Hasheminia, Gholam Hossein Baradaran, Heoung Jae Chun

研究成果: Article査読

1 被引用数 (Scopus)

抄録

In this article, the finite element method is utilized to understand the bending response of both straight and tapered nanowires under large deformation. The force field caused by the residual surface stress is applied in the nanowire longitudinal direction and is formulated accordingly. Then, a finite element code is developed to analyze the large bending responses of the nanobeam in three different boundary conditions. As expected, the cantilever nanowire behaves softly under the positive surface stress and rigidly when the surface stress is negative. However, the simply supported and fixed–fixed nanobeams act like a more rigid beam for σ0> 0 and present softer behavior for σ0< 0. In addition, in the high value of forces in the cantilever beam, for which the deformation becomes large, the curvature tends to significantly increase, and the effect of surface stress disappears. Bending of tapered nanobeams is also analyzed the same way.

本文言語English
ページ(範囲)21-32
ページ数12
ジャーナルActa Mechanica
229
1
DOI
出版ステータスPublished - 2018 1 1
外部発表はい

ASJC Scopus subject areas

  • Computational Mechanics
  • Mechanical Engineering

フィンガープリント 「Nonlinear finite element modeling of large deformation of nanobeams」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル