Observation and manipulation of a capillary jet in a centrifuge-based droplet shooting device

Kazuki Maeda, Hiroaki Onoe, Masahiro Takinoue, Shoji Takeuchi

研究成果: Article査読

6 被引用数 (Scopus)

抄録

We report observation and manipulation of a capillary jet under ultra-high centrifugal gravity in a proposed capillary-based fluidic device for the synthesis of microparticles in a centrifugal tube called Centrifuge-Based Droplet Shooting Device (CDSD). Using a high-speed camera, we directly observed the dripping to jetting transition of a viscous capillary jet of water and Sodium alginate solution generated from a glass capillary-orifice of a diameter of O (100) μm under centrifugal gravity ranging from 190 to 450 g. A non-dimensional analysis shows that the mechanism of the dripping-jetting transition in the CDSD may follow that previously reported for a dripping faucet under standard gravity. We also fabricated calcium alginate microparticles by gelating droplets of sodium alginate solution obtained in the break-up of the capillary jet in the jetting regime and demonstrated fabrication of microbeads-on-a-string structures. We confirmed that the jetting regime of the capillary jet could be used to fabricate smaller particles than that of the dripping regime. The results show that the CDSD would be a more useful device to fabricate various polymeric structures and understand the physics of fluid jets under ultra-high gravity.

本文言語English
ページ(範囲)1526-1533
ページ数8
ジャーナルMicromachines
6
10
DOI
出版ステータスPublished - 2015
外部発表はい

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「Observation and manipulation of a capillary jet in a centrifuge-based droplet shooting device」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル