On hybrid position/force cooperative control of multimanipulator based on workspace disturbance observer

Edi Leksono, Toshiyuki Murakami, Kouhei Ohnishi

研究成果: Paper査読

4 被引用数 (Scopus)

抄録

In the coordinated motion of cooperative multimanipulator carrying an object, the actuators must generate motion inducing forces and internal forces (grasping forces). When the desired motion inducing force and the internal force are completely resolved then the position control and the force control can be realized independently. Otherwise, conflicting motions may occur. This paper proposes a hybrid position/force cooperative control scheme based on workspace disturbance observer which realizes a robust motion control system. The conflicting motion can be avoided because the disturbance observer based position and force control are allowed to operate in the opposite direction to each other. The use of disturbance observer is also to make the system parameter relatively fixed to some value such that a fixed gain controller can be chosen to achieve the desired system performance. Finally, simulation results show the validity of the proposed hybrid position/force cooperative control of multimanipulator.

本文言語English
ページ1873-1878
ページ数6
出版ステータスPublished - 1996
イベントProceedings of the 1996 IEEE 22nd International Conference on Industrial Electronics, Control, and Instrumentation, IECON. Part 3 (of 3) - Taipei, Taiwan
継続期間: 1996 8 51996 8 10

Other

OtherProceedings of the 1996 IEEE 22nd International Conference on Industrial Electronics, Control, and Instrumentation, IECON. Part 3 (of 3)
CityTaipei, Taiwan
Period96/8/596/8/10

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「On hybrid position/force cooperative control of multimanipulator based on workspace disturbance observer」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル