Performance assessment of a building with passive dampers using MIMO system identification

R. Kudo, Y. Nakamura, Akira Mita, H. Harada

研究成果: Conference contribution

1 引用 (Scopus)

抄録

Tor ihe purpose ol monitoring building behavior under earthquakes, a structural health monitoring (SHM) system was installed into a medium-height office building in Tokyo. This building is equipped with passive energy dissipation devices, including viscous vibration control walls and low yield point steel-based buckling restraint braces. As a SHM system, accelerometers were installed on several floors and strain sensors were glued to a few dampers on the sixth floor. When earthquakes occurred, observations are done and acceleration and strain data of each point of the building were obtained. With the data, MIMO system identification methods were applied to estimate dynamical behavior of the building. From collected observations of the last 4 years, the natural frequencies have shown a gradual decreasing tendency. Detailed discussions on this phenomena is given in this paper.

元の言語English
ホスト出版物のタイトルStructural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007
出版者DEStech Publications
ページ1431-1438
ページ数8
2
ISBN(印刷物)9781932078718
出版物ステータスPublished - 2007
イベント6th International Workshop on Structural Health Monitoring: Quantification, Validation, and Implementation, IWSHM 2007 - Stanford, United States
継続期間: 2007 9 112007 9 13

Other

Other6th International Workshop on Structural Health Monitoring: Quantification, Validation, and Implementation, IWSHM 2007
United States
Stanford
期間07/9/1107/9/13

Fingerprint

Earthquakes
Structural health monitoring
MIMO systems
Identification (control systems)
Braces
Tokyo
Office buildings
Bridge decks
Steel
Health
Vibration control
Vibration
Accelerometers
Buckling
Natural frequencies
Energy dissipation
Equipment and Supplies
Monitoring
Sensors

ASJC Scopus subject areas

  • Computer Science Applications
  • Health Information Management

これを引用

Kudo, R., Nakamura, Y., Mita, A., & Harada, H. (2007). Performance assessment of a building with passive dampers using MIMO system identification. : Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007 (巻 2, pp. 1431-1438). DEStech Publications.

Performance assessment of a building with passive dampers using MIMO system identification. / Kudo, R.; Nakamura, Y.; Mita, Akira; Harada, H.

Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007. 巻 2 DEStech Publications, 2007. p. 1431-1438.

研究成果: Conference contribution

Kudo, R, Nakamura, Y, Mita, A & Harada, H 2007, Performance assessment of a building with passive dampers using MIMO system identification. : Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007. 巻. 2, DEStech Publications, pp. 1431-1438, 6th International Workshop on Structural Health Monitoring: Quantification, Validation, and Implementation, IWSHM 2007, Stanford, United States, 07/9/11.
Kudo R, Nakamura Y, Mita A, Harada H. Performance assessment of a building with passive dampers using MIMO system identification. : Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007. 巻 2. DEStech Publications. 2007. p. 1431-1438
Kudo, R. ; Nakamura, Y. ; Mita, Akira ; Harada, H. / Performance assessment of a building with passive dampers using MIMO system identification. Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007. 巻 2 DEStech Publications, 2007. pp. 1431-1438
@inproceedings{f7ddfb436d134318a610104849c3abdc,
title = "Performance assessment of a building with passive dampers using MIMO system identification",
abstract = "Tor ihe purpose ol monitoring building behavior under earthquakes, a structural health monitoring (SHM) system was installed into a medium-height office building in Tokyo. This building is equipped with passive energy dissipation devices, including viscous vibration control walls and low yield point steel-based buckling restraint braces. As a SHM system, accelerometers were installed on several floors and strain sensors were glued to a few dampers on the sixth floor. When earthquakes occurred, observations are done and acceleration and strain data of each point of the building were obtained. With the data, MIMO system identification methods were applied to estimate dynamical behavior of the building. From collected observations of the last 4 years, the natural frequencies have shown a gradual decreasing tendency. Detailed discussions on this phenomena is given in this paper.",
author = "R. Kudo and Y. Nakamura and Akira Mita and H. Harada",
year = "2007",
language = "English",
isbn = "9781932078718",
volume = "2",
pages = "1431--1438",
booktitle = "Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007",
publisher = "DEStech Publications",

}

TY - GEN

T1 - Performance assessment of a building with passive dampers using MIMO system identification

AU - Kudo, R.

AU - Nakamura, Y.

AU - Mita, Akira

AU - Harada, H.

PY - 2007

Y1 - 2007

N2 - Tor ihe purpose ol monitoring building behavior under earthquakes, a structural health monitoring (SHM) system was installed into a medium-height office building in Tokyo. This building is equipped with passive energy dissipation devices, including viscous vibration control walls and low yield point steel-based buckling restraint braces. As a SHM system, accelerometers were installed on several floors and strain sensors were glued to a few dampers on the sixth floor. When earthquakes occurred, observations are done and acceleration and strain data of each point of the building were obtained. With the data, MIMO system identification methods were applied to estimate dynamical behavior of the building. From collected observations of the last 4 years, the natural frequencies have shown a gradual decreasing tendency. Detailed discussions on this phenomena is given in this paper.

AB - Tor ihe purpose ol monitoring building behavior under earthquakes, a structural health monitoring (SHM) system was installed into a medium-height office building in Tokyo. This building is equipped with passive energy dissipation devices, including viscous vibration control walls and low yield point steel-based buckling restraint braces. As a SHM system, accelerometers were installed on several floors and strain sensors were glued to a few dampers on the sixth floor. When earthquakes occurred, observations are done and acceleration and strain data of each point of the building were obtained. With the data, MIMO system identification methods were applied to estimate dynamical behavior of the building. From collected observations of the last 4 years, the natural frequencies have shown a gradual decreasing tendency. Detailed discussions on this phenomena is given in this paper.

UR - http://www.scopus.com/inward/record.url?scp=84945197417&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84945197417&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84945197417

SN - 9781932078718

VL - 2

SP - 1431

EP - 1438

BT - Structural Health Monitoring 2007: Quantification, Validation, and Implementation - Proceedings of the 6th International Workshop on Structural Health Monitoring, IWSHM 2007

PB - DEStech Publications

ER -