Position control using an FPGA based on multirate acceleration control

Hiroyuki Tanaka, Kouhei Ohnishi, Hiroaki Nishi

研究成果: Conference contribution

4 被引用数 (Scopus)

抄録

Acceleration control using a disturbance observer is a strategy of robust motion control. In the acceleration control, fast sampling rate is a key issue to improve the performance of robustness. By using FPGAs, faster sampling rates can be achieved than those using PCs. The sampling rates of the systems using FPGAs can be faster than the frequency of PWM wave. In that case, the performance of the acceleration control is not improved as expected. The frequency of the PWM wave becomes a performance limitation of the system. In this paper, a position control system based on acceleration control using multirate sampling method is implemented into an FPGA to overcome the limitations. In these multirate systems, the sampling rates of the system output and control calculations are faster than that of the system input. Experimental results show that the robustness of the system can be improved, even though the sampling rates of the system output and the control calculations are faster than the PWM frequency by using the multirate sampling method.

本文言語English
ホスト出版物のタイトルProceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007
DOI
出版ステータスPublished - 2007 12 1
イベント4th IEEE International Conference on Mechatronics, ICM 2007 - Kumamoto, Japan
継続期間: 2007 5 82007 5 10

出版物シリーズ

名前Proceedings of the 2007 4th IEEE International Conference on Mechatronics, ICM 2007

Other

Other4th IEEE International Conference on Mechatronics, ICM 2007
国/地域Japan
CityKumamoto
Period07/5/807/5/10

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「Position control using an FPGA based on multirate acceleration control」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル