Possibility to Estimate Fracture Toughness of Ductile Steel Materials from Small Punch Test Data

J. Y. Jeon, Y. J. Kim, J. W. Kim, S. Y. Lee

研究成果: Conference article査読

抄録

This paper presents a procedure to predict fracture toughness of steel material using small punch test (or notched small punch test) and finite element (FE) damage analysis. Tensile property can be determined from setting the constitutive equations and can be validated by comparing the small punch (SP) test data with FE results applying the determined tensile property. FE damage analysis used in this paper is based on the strain-based fracture model. Material constants in the model are normally determined from analyzing notched bar tensile tests. To determine these material constants from SP test instead of notched bar tensile tests, simplified model (with only one material constant) can be introduced and used in the simulations. SP test and notched small punch (NSP) test are simulated via FE damage analyses using the tensile property and simplified strain-based fracture model. NSP simulation results are sensitive to element size. However, SP simulation results are not sensitive to element size. Compact tension (C(T)) test is also simulated and it can be found that the proper element size for C(T) simulation is four times of that for NSP simulation to predict cracking initiation toughness.

本文言語English
ページ(範囲)1029-1038
ページ数10
ジャーナルProcedia Engineering
130
DOI
出版ステータスPublished - 2015
外部発表はい
イベント14th International Conference on Pressure Vessel Technology, 2015 - Shanghai, China
継続期間: 2015 9月 232015 9月 26

ASJC Scopus subject areas

  • 建築および建設
  • 工学(全般)

フィンガープリント

「Possibility to Estimate Fracture Toughness of Ductile Steel Materials from Small Punch Test Data」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル