Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin

Mayu Muramatsu, Yoshihisa Harada, Takayuki Suzuki, Hiroyuki Niino

研究成果: Article

1 引用 (Scopus)

抜粋

In this study, the correlation between the stress-strain behavior of a carbon fiber-reinforced plastic (CFRP) and the temperature at which the heat-affected zone (HAZ) is generated is investigated. First, CFRP ([-45/45]2s laminate) specimens were heated at several temperatures to induce thermal damage, i.e. a HAZ. Subsequently, tensile tests were conducted on the specimens with thermal damage. Then, microscopy and X-ray measurements were carried out to discuss the stress-strain responses from a microscopic viewpoint. The results of strain measurement during thermal treatment indicated that the strain increases with increasing temperature. The tensile tests showed that the CFRP specimens subjected to thermal damage during heating at a high temperature fractured in the ductile mode, whereas the fracture mode of the CFRP specimens with low-temperature thermal damage was discontinuous. Microstructure observation using X-ray tomography showed that the debonding between the carbon fibers and the resin matrix induced by heating to above the glass transition temperature was responsible for the continuous fracture mode.

元の言語English
ページ(範囲)143-158
ページ数16
ジャーナルAdvanced Composite Materials
25
発行部数2
DOI
出版物ステータスPublished - 2016 3 3
外部発表Yes

ASJC Scopus subject areas

  • Ceramics and Composites
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用