Simulation method on three-dimensional shape generation process by femtosecond laser ablation

Hiroyuki Kawakami, Shunsuke Nabetani, Masahiro Ueda, Yoshinori Ogawa, Kazuo Yamazaki, Hideki Aoyama

研究成果: Conference article査読

2 被引用数 (Scopus)

抄録

Ablation processing using a femtosecond laser has the advantage of processing materials that are impossible to machine by conventional methods. However, it is difficult to predict the three-dimensional removal shape owing to a femtosecond laser irradiation and the current processing method, repeating through trial and error, is inefficient and expensive. For this reason, for processing materials to desired shapes using a femtosecond laser, development of a simulation system and a CAM (Computer-Aided Manufacturing) system are indispensable. In this paper, a simulation method for processing materials using a femtosecond laser is proposed and conducted to nano-polycrystalline diamond (NPD). It is confirmed that the proposed method can precisely simulate the femtosecond laser processing for three-dimensional shape generation. Therefore, the proposed method enables to predict the removal shape identified as the virtual tool shape for calculating a tool path on a CAM system. In addition, an automation process method including an on-machine real-time measurement system of the proposed method is described.

本文言語English
ページ(範囲)921-926
ページ数6
ジャーナルProcedia CIRP
95
DOI
出版ステータスPublished - 2020
イベント20th CIRP Conference on Electro Physical and Chemical Machining, ISEM 2020 - Zurich, Online, Switzerland
継続期間: 2021 1月 192021 1月 21

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 産業および生産工学

フィンガープリント

「Simulation method on three-dimensional shape generation process by femtosecond laser ablation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル