Surface properties of intermetallic compound layer formed on titanium alloy by AIH-FPP (Atmospheric controlled induction heating fine particle peening) treatment+1

Shogo Takesue, Shuya Saito, Jun Komotori, Yoshitaka Misaka, Kazuhiro Kawasaki

研究成果: Article査読

2 被引用数 (Scopus)

抄録

The effect of the intermetallic compound layer formed by atmospheric controlled induction heating fine particle peening (AIH-FPP) treatment on the wear resistance and high-temperature oxidation resistance of titanium alloy was investigated. To form an intermetallic compound layer on a titanium alloy by AIH-FPP treatment, pure titanium, aluminum and nickel particles were mechanically milled using a planetary ball mill, and the prepared particles were used as shot particles in the AIH-FPP treatment. The results showed that intermetallic compound layers, consisted of Ti3Al and Ti2NiAl3, were formed on titanium alloy by AIH-FPP treatment using the prepared particles. The wear resistance and high-temperature oxidation resistance of the AIH-FPP treated specimen were higher than those of the untreated ones.

本文言語English
ページ(範囲)1452-1457
ページ数6
ジャーナルMaterials Transactions
59
9
DOI
出版ステータスPublished - 2018

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Surface properties of intermetallic compound layer formed on titanium alloy by AIH-FPP (Atmospheric controlled induction heating fine particle peening) treatment<sup>+</sup>1」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル