Surgical Simulation and Custom-Made Implant for Cranial Fibrous Dysplasia

研究成果: Article

抄録

Background: The management of fronto-orbital fibrous dysplasia involves total excision of the dysplastic bone and bone reconstruction using implants. Custom-made implants are used to achieve good contouring. However, the remnant defect after excising the lesion often does not match the implant. Methods: To design the craniotomy line, a template was prepared by preoperative computed surgical simulation. The template was overlaid on the preoperative cranium, such that its inner surface fits exactly with the cranial surface. After excising the lesion by performing osteotomy, the implant was placed in the defect and fixed. Both template and implant were made of hydroxyapatite. Results: The authors treated 4 patients, with fibrous dysplasia involving the fronto-facial region by using the template. Intraoperative trimming of the implant or bone defect was not required in 2 patients, while the third patient required mild trimming. They did not have any complications and obtained good contouring. Conclusion: The hydroxyapatite templates reduced the surgical time by determining the precise craniotomy line preoperatively, thus avoiding needless trimming of the implant and bone defect. Therefore, they can enhance the efficacy of treatment for fronto-orbital fibrous dysplasia lesion.

元の言語English
ページ(範囲)1352-1353
ページ数2
ジャーナルJournal of Craniofacial Surgery
29
発行部数5
DOI
出版物ステータスPublished - 2018 7 1

Fingerprint

Craniotomy
Durapatite
Bone and Bones
Operative Time
Osteotomy
Skull

ASJC Scopus subject areas

  • Surgery
  • Otorhinolaryngology

これを引用

@article{ecb1a9862c4c48c2b3488bb5ac8f6802,
title = "Surgical Simulation and Custom-Made Implant for Cranial Fibrous Dysplasia",
abstract = "Background: The management of fronto-orbital fibrous dysplasia involves total excision of the dysplastic bone and bone reconstruction using implants. Custom-made implants are used to achieve good contouring. However, the remnant defect after excising the lesion often does not match the implant. Methods: To design the craniotomy line, a template was prepared by preoperative computed surgical simulation. The template was overlaid on the preoperative cranium, such that its inner surface fits exactly with the cranial surface. After excising the lesion by performing osteotomy, the implant was placed in the defect and fixed. Both template and implant were made of hydroxyapatite. Results: The authors treated 4 patients, with fibrous dysplasia involving the fronto-facial region by using the template. Intraoperative trimming of the implant or bone defect was not required in 2 patients, while the third patient required mild trimming. They did not have any complications and obtained good contouring. Conclusion: The hydroxyapatite templates reduced the surgical time by determining the precise craniotomy line preoperatively, thus avoiding needless trimming of the implant and bone defect. Therefore, they can enhance the efficacy of treatment for fronto-orbital fibrous dysplasia lesion.",
keywords = "Computer-aided engineering, cranial reconstruction, custom-made implants, fibrous dysplasia, hydroxyapatite, template",
author = "Yoshiaki Sakamoto and Tomoru Miwa and Kazunari Yoshida and Kazuo Kishi",
year = "2018",
month = "7",
day = "1",
doi = "10.1097/SCS.0000000000004493",
language = "English",
volume = "29",
pages = "1352--1353",
journal = "Journal of Craniofacial Surgery",
issn = "1049-2275",
publisher = "Lippincott Williams and Wilkins",
number = "5",

}

TY - JOUR

T1 - Surgical Simulation and Custom-Made Implant for Cranial Fibrous Dysplasia

AU - Sakamoto, Yoshiaki

AU - Miwa, Tomoru

AU - Yoshida, Kazunari

AU - Kishi, Kazuo

PY - 2018/7/1

Y1 - 2018/7/1

N2 - Background: The management of fronto-orbital fibrous dysplasia involves total excision of the dysplastic bone and bone reconstruction using implants. Custom-made implants are used to achieve good contouring. However, the remnant defect after excising the lesion often does not match the implant. Methods: To design the craniotomy line, a template was prepared by preoperative computed surgical simulation. The template was overlaid on the preoperative cranium, such that its inner surface fits exactly with the cranial surface. After excising the lesion by performing osteotomy, the implant was placed in the defect and fixed. Both template and implant were made of hydroxyapatite. Results: The authors treated 4 patients, with fibrous dysplasia involving the fronto-facial region by using the template. Intraoperative trimming of the implant or bone defect was not required in 2 patients, while the third patient required mild trimming. They did not have any complications and obtained good contouring. Conclusion: The hydroxyapatite templates reduced the surgical time by determining the precise craniotomy line preoperatively, thus avoiding needless trimming of the implant and bone defect. Therefore, they can enhance the efficacy of treatment for fronto-orbital fibrous dysplasia lesion.

AB - Background: The management of fronto-orbital fibrous dysplasia involves total excision of the dysplastic bone and bone reconstruction using implants. Custom-made implants are used to achieve good contouring. However, the remnant defect after excising the lesion often does not match the implant. Methods: To design the craniotomy line, a template was prepared by preoperative computed surgical simulation. The template was overlaid on the preoperative cranium, such that its inner surface fits exactly with the cranial surface. After excising the lesion by performing osteotomy, the implant was placed in the defect and fixed. Both template and implant were made of hydroxyapatite. Results: The authors treated 4 patients, with fibrous dysplasia involving the fronto-facial region by using the template. Intraoperative trimming of the implant or bone defect was not required in 2 patients, while the third patient required mild trimming. They did not have any complications and obtained good contouring. Conclusion: The hydroxyapatite templates reduced the surgical time by determining the precise craniotomy line preoperatively, thus avoiding needless trimming of the implant and bone defect. Therefore, they can enhance the efficacy of treatment for fronto-orbital fibrous dysplasia lesion.

KW - Computer-aided engineering

KW - cranial reconstruction

KW - custom-made implants

KW - fibrous dysplasia

KW - hydroxyapatite

KW - template

UR - http://www.scopus.com/inward/record.url?scp=85050184474&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050184474&partnerID=8YFLogxK

U2 - 10.1097/SCS.0000000000004493

DO - 10.1097/SCS.0000000000004493

M3 - Article

C2 - 29561485

AN - SCOPUS:85050184474

VL - 29

SP - 1352

EP - 1353

JO - Journal of Craniofacial Surgery

JF - Journal of Craniofacial Surgery

SN - 1049-2275

IS - 5

ER -