Telerobotic-assisted bone-drilling system using bilateral control with feed operation scaling and cutting force scaling

Yusuke Kasahara, Hiromasa Kawana, Shin Usuda, Kouhei Ohnishi

研究成果: Article査読

36 被引用数 (Scopus)


Background: Drilling is used in the medical field, especially in oral surgery and orthopaedics. In recent years, oral surgery involving dental implants has become more common. However, the risky drilling process causes serious accidents. To prevent these accidents, supporting systems such as robotic drilling systems are required. Methods: A telerobotic-assisted drilling system is proposed. An acceleration-based four-channel bilateral control system is implemented in linear actuators in a master-slave system for drill feeding. A reaction force observer is used instead of a force sensor for measuring cutting force. Cutting force transmits from a cutting material to a surgeon, who may feel a static cutting resistance force and vigorous cutting vibrations, via the master-slave system. Moreover, position scaling and force scaling are achieved. Scaling functions are used to achieve precise drilling and hazard detection via force sensation. Results: Cutting accuracy and reproducibility of the cutting force were evaluated by angular velocity/position error and frequency analysis of the cutting force, respectively, and errors were>2.0rpm and>0.2mm, respectively. Spectrum peaks of the cutting vibration were at the theoretical vibration frequencies of 30, 60 and 90Hz. Conclusions: The proposed telerobotic-assisted drilling system achieved precise manipulation of the drill feed and vivid feedback from the cutting force.

ジャーナルInternational Journal of Medical Robotics and Computer Assisted Surgery
出版ステータスPublished - 2012 6

ASJC Scopus subject areas

  • 外科
  • 生物理学
  • コンピュータ サイエンスの応用


「Telerobotic-assisted bone-drilling system using bilateral control with feed operation scaling and cutting force scaling」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。