Thermal Propagation Control Using Thermal Diffusion Equation

Yukiko Osawa, Seiichiro Katsura

研究成果: Article

4 引用 (Scopus)

抜粋

Controlling heat flow is necessary in many fields, such as communication, health care, and manufacturing industry. In the communication field, the techniques for the reproduction of thermal sensations have been researched for many years. In order to extend the area of controlling the heat, the thermal diffusion in time and space needs to be considered. However, attaining precise control based on conventional methods is difficult because it requires several sensors and devices to monitor and control the temperature distribution. In this study, the thermal system consists of a metal wire and a Peltier device attached to the end of the wire, and constructed 1 dimensional thermal propagation system. Modeling the thermal diffusion equation, it was found that the thermal system has characteristics of damping and propagation delay. Therefore, a control method using these system characteristics is proposed. The thermal system is treated as a time delay system with damping, which is compensated by a time delay and damping compensator. The thermal diffusion through the system can be considered by the proposed method. Experimental results show the viability of the proposed control system.

元の言語English
ジャーナルIEEE Transactions on Industrial Electronics
DOI
出版物ステータスAccepted/In press - 2018 3 10

    フィンガープリント

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

これを引用