Thermal/acoustic trade-off design for consumer electronics in a distributed design environment

Kenichi Seki, Hidekazu Nishimura, Kosuke Ishii, Laurent Balmelli

研究成果: Conference contribution

5 引用 (Scopus)

抜粋

Today's market demand for smaller, more powerful consumer electronics poses a major challenge to the rapid design of products. In addition, the ability to perform strategic coordination amongst different stakeholders within the enterprise increasingly becomes an important criterion to enable global engineering. We begin the paper with an introduction to a typical design process involving distributed design teams In particular the process allows the thermal-acoustic design of cavities, i.e. air space inside the enclosure, in terms of flow rate and acoustic radiation resistance. Then we proceed with the investigation of an approach leveraging recent modelling technology to support such a process efficiently. The process makes use of the system modelling language (SysML.) as product description support and the Design Structure Matrix as an analytical design tool. We use the model and the DSM as a means to drive numerical simulation and perform trade-off studies. Simulation results show that performing trade-off study in the early system design phase leads to a potentially optimal module layout for the problem studied.

元の言語English
ホスト出版物のタイトル19th Annual International Symposium of the International Council on Systems Engineering (INCOSE 2009) in conjunction with the 3rd Asia-Pacific Conference on Systems Engineering APCOSE 2009
ページ1126-1138
ページ数13
出版物ステータスPublished - 2009 12 1
イベント19th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2009 - , Singapore
継続期間: 2009 7 202009 7 23

出版物シリーズ

名前19th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2009
3

Other

Other19th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2009
Singapore
期間09/7/2009/7/23

ASJC Scopus subject areas

  • Hardware and Architecture
  • Information Systems
  • Control and Systems Engineering

フィンガープリント Thermal/acoustic trade-off design for consumer electronics in a distributed design environment' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Seki, K., Nishimura, H., Ishii, K., & Balmelli, L. (2009). Thermal/acoustic trade-off design for consumer electronics in a distributed design environment. : 19th Annual International Symposium of the International Council on Systems Engineering (INCOSE 2009) in conjunction with the 3rd Asia-Pacific Conference on Systems Engineering APCOSE 2009 (pp. 1126-1138). (19th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2009; 巻数 3).