Thermoelastoplastic analysis of a filamentary metal matrix composite

Heoung Jae Chun, Isaac M. Daniel

研究成果: Article

2 引用 (Scopus)

抄録

The thermoelastoplastic behavior of a unidirectional metal matrix composite (SiC/Al) material was studied with a coaxial cylinder model. The fiber is considered elastic and temperature-independent whereas the matrix is thermoviscoplastic and fitted into a series of power-law strain hardening models. The analysis was based on a successive approximation scheme with the plastic flow rule and von Mises yield criterion. The three-dimensional state of stress in the fiber and matrix was computed for mechanical and thermal loadings. In addition, the stress-strain curves under longitudinal tension at different temperatures and the thermal strain-temperature relation of the composite were predicted and compared with experimental results. The predicted stress-strain curves under longitudinal tension at different temperature showed good agreement with experimental results. The predicted thermal strain-temperature curves in the longitudinal and transverse directions were also in favorable agreement with experimental ones.

元の言語English
ページ(範囲)199-216
ページ数18
ジャーナルApplied Composite Materials: An International Journal for the Science and Application of Composite Materials
2
発行部数4
DOI
出版物ステータスPublished - 1995 1 1
外部発表Yes

Fingerprint

Metals
Composite materials
Stress-strain curves
Temperature
Fibers
Plastic flow
Strain hardening
Hot Temperature

ASJC Scopus subject areas

  • Ceramics and Composites

これを引用

@article{6d498d8826f6463394cd2afc4e80286a,
title = "Thermoelastoplastic analysis of a filamentary metal matrix composite",
abstract = "The thermoelastoplastic behavior of a unidirectional metal matrix composite (SiC/Al) material was studied with a coaxial cylinder model. The fiber is considered elastic and temperature-independent whereas the matrix is thermoviscoplastic and fitted into a series of power-law strain hardening models. The analysis was based on a successive approximation scheme with the plastic flow rule and von Mises yield criterion. The three-dimensional state of stress in the fiber and matrix was computed for mechanical and thermal loadings. In addition, the stress-strain curves under longitudinal tension at different temperatures and the thermal strain-temperature relation of the composite were predicted and compared with experimental results. The predicted stress-strain curves under longitudinal tension at different temperature showed good agreement with experimental results. The predicted thermal strain-temperature curves in the longitudinal and transverse directions were also in favorable agreement with experimental ones.",
keywords = "aluminum matrix composites, constitutive relations, elastoplastic analysis, experimental characterization, metal matrix composites, micromechanics, thermal deformations, thermoelastic analysis",
author = "Chun, {Heoung Jae} and Daniel, {Isaac M.}",
year = "1995",
month = "1",
day = "1",
doi = "10.1007/BF00567192",
language = "English",
volume = "2",
pages = "199--216",
journal = "Applied Composite Materials",
issn = "0929-189X",
publisher = "Springer Netherlands",
number = "4",

}

TY - JOUR

T1 - Thermoelastoplastic analysis of a filamentary metal matrix composite

AU - Chun, Heoung Jae

AU - Daniel, Isaac M.

PY - 1995/1/1

Y1 - 1995/1/1

N2 - The thermoelastoplastic behavior of a unidirectional metal matrix composite (SiC/Al) material was studied with a coaxial cylinder model. The fiber is considered elastic and temperature-independent whereas the matrix is thermoviscoplastic and fitted into a series of power-law strain hardening models. The analysis was based on a successive approximation scheme with the plastic flow rule and von Mises yield criterion. The three-dimensional state of stress in the fiber and matrix was computed for mechanical and thermal loadings. In addition, the stress-strain curves under longitudinal tension at different temperatures and the thermal strain-temperature relation of the composite were predicted and compared with experimental results. The predicted stress-strain curves under longitudinal tension at different temperature showed good agreement with experimental results. The predicted thermal strain-temperature curves in the longitudinal and transverse directions were also in favorable agreement with experimental ones.

AB - The thermoelastoplastic behavior of a unidirectional metal matrix composite (SiC/Al) material was studied with a coaxial cylinder model. The fiber is considered elastic and temperature-independent whereas the matrix is thermoviscoplastic and fitted into a series of power-law strain hardening models. The analysis was based on a successive approximation scheme with the plastic flow rule and von Mises yield criterion. The three-dimensional state of stress in the fiber and matrix was computed for mechanical and thermal loadings. In addition, the stress-strain curves under longitudinal tension at different temperatures and the thermal strain-temperature relation of the composite were predicted and compared with experimental results. The predicted stress-strain curves under longitudinal tension at different temperature showed good agreement with experimental results. The predicted thermal strain-temperature curves in the longitudinal and transverse directions were also in favorable agreement with experimental ones.

KW - aluminum matrix composites

KW - constitutive relations

KW - elastoplastic analysis

KW - experimental characterization

KW - metal matrix composites

KW - micromechanics

KW - thermal deformations

KW - thermoelastic analysis

UR - http://www.scopus.com/inward/record.url?scp=0029490226&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029490226&partnerID=8YFLogxK

U2 - 10.1007/BF00567192

DO - 10.1007/BF00567192

M3 - Article

AN - SCOPUS:0029490226

VL - 2

SP - 199

EP - 216

JO - Applied Composite Materials

JF - Applied Composite Materials

SN - 0929-189X

IS - 4

ER -