Three-axis SOI capacitive accelerometer with PLL C-V converter

Y. Matsumoto, M. Nishimura, M. Matsuura, M. Ishida

研究成果: Article

52 引用 (Scopus)

抜粋

A three-axis capacitive accelerometer has been developed using silicon-direct-bonding SOI wafer. Z-axis accelerometer has 1 mm×1 mm plane mass and spiral shape beams of few millimeters in length. The mass and beams were formed using 6 μm thick single-crystal silicon. A gap of 1 μm has been maintained between the mass and one-side plate. X- and Y-axis accelerometers have comb structure of 3 mm×1 mm size and folded beams of few millimeters in length. Length of comb electrodes is 200 μm, and a gap of 4 μm is maintained between them. Initial sensor capacitance was about 5 pF for Z-axis accelerometers and 2 pF for X- and Y-axis accelerometers. Sacrificial etching process was performed using 73% HF solution without attacking aluminum metallization. `After-rinse stiction' was prevented using photoresist buried plug and side stopper with on yield of better than 90%. `In-use stiction' was prevented using fluorocarbon film formed by plasma polymerization equipment. The sensor characteristics were measured with PLL capacitance to voltage converter IC that was custom designed to reduce parasitic capacitance error and electric static error with offset and sensitivity calibration functions.

元の言語English
ページ(範囲)77-85
ページ数9
ジャーナルSensors and Actuators, A: Physical
75
発行部数1
DOI
出版物ステータスPublished - 1999 5 4
外部発表Yes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering

フィンガープリント Three-axis SOI capacitive accelerometer with PLL C-V converter' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用