Three-Dimensional Printing of Life-Like Models for Simulation and Training of Minimally Invasive Cardiac Surgery

Toshiyuki Yamada, Motohiko Osaka, Tomoya Uchimuro, Ryogen Yoon, Toshiaki Morikawa, Maki Sugimoto, Hisao Suda, Hideyuki Shimizu

研究成果: Article査読

12 被引用数 (Scopus)


Objective: As the use of minimally invasive surgery in cardiothoracic surgery increases, so does the need for simulation and training. We developed a heart model for simulation and training of minimally invasive cardiac surgery, particularly minimally invasive mitral valve repair using our new three-dimensional printing system. Methods: Digital imaging and communication in medicine data from patient computed tomography, three-dimensional computer-aided design, and three-dimensional printing helped create replicas of the heart and thoracic cavity. A polyvinyl alcohol model material with a texture and physical properties similar to those of heart tissue was initially used in mitral valve replicas to simulate surgical procedures. To develop this material, we mechanically investigated the composition of each part of the porcine heart. Results: We investigated the elastic modulus and breaking strength of the porcine heart. Based on investigation results, the cardiac model was set at rupture strength 20 MPa, elastic modulus 0.17 MPa, and moisture content 85%. This provided a biotexture and feeling exactly like a patient heart. Computed tomography scans confirmed that the model shape was nearly the same as that of a human heart. We simulated minimally invasive mitral valve repair, including ring annuloplasty, chordal reconstruction, resection and suture, and edge-to-edge repair. Full surgery simulations using this model used minimally invasive cardiac surgery tools including a robot. Conclusions: This life-like model can be used as a standard simulator to train younger, less experienced surgeons to practice minimally invasive cardiac surgery procedures and may help develop new operative tools.

ジャーナルInnovations: Technology and Techniques in Cardiothoracic and Vascular Surgery
出版ステータスPublished - 2017 11月 1

ASJC Scopus subject areas

  • 外科
  • 呼吸器内科
  • 循環器および心血管医学


「Three-Dimensional Printing of Life-Like Models for Simulation and Training of Minimally Invasive Cardiac Surgery」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。