Topology analysis of position information in multilateral communication system

Satoshi Nishimura, Seiichiro Katsura

研究成果: Conference contribution

抄録

This paper proposes the best topology in multilateral control system. Multilateral control system is a control system which enables to share tactile information between several subsystems. Specifically, every subsystems communicates position and force information each other to achieve control goal. As shown above, the information flow is bilateral in multilateral control, and when sharing haptic information between several remote places, there occurs delay time in each communication links. When there exists delay time inside control system, the system starts to destabilize and haptic information deteriorates. In order to prevent the deterioration of the information, the optimal topology regarding position information is realized in this paper. The proposed method can be applied to a system where the delay time of each communication links is different from each other. The validity of the proposal is confirmed by experiments, and the results show that the degradation of haptic sensation under communication delay is prevented.

本文言語English
ホスト出版物のタイトルProceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society
ページ6569-6574
ページ数6
DOI
出版ステータスPublished - 2013 12月 1
イベント39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013 - Vienna, Austria
継続期間: 2013 11月 102013 11月 14

出版物シリーズ

名前IECON Proceedings (Industrial Electronics Conference)

Other

Other39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013
国/地域Austria
CityVienna
Period13/11/1013/11/14

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「Topology analysis of position information in multilateral communication system」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル