Two-step design method of engine control system based on generalized predictive control

Seiji Hashimoto, Hiroyuki Okuda, Yasushi Okada, Shuichi Adachi, Shinji Niwa, Mitsunobu Kajitani

研究成果: Article査読

抄録

Conservation of the environment has become critical to the automotive industry. Recently, requirements for on-board diagnostic and engine control systems have been strictly enforced. In the present paper, in order to meet the requirements for a low-emissions vehicle, a novel construction method of the air-fuel ratio (A/F) control system is proposed. The construction method of the system is divided into two steps. The first step is to design the A/F control system for the engine based on an open loop design. The second step is to design the A/F control system for the catalyst system. The design method is based on the generalized predictive control in order to satisfy the robustness to open loop control as well as model uncertainty. The effectiveness of the proposed A/F control system is verified through experiments using full-scale products.

本文言語English
ページ(範囲)251-258+12
ジャーナルieej transactions on industry applications
128
3
DOI
出版ステータスPublished - 2008 12 1

ASJC Scopus subject areas

  • 産業および生産工学
  • 電子工学および電気工学

フィンガープリント

「Two-step design method of engine control system based on generalized predictive control」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル