Ultrahydrophobic silica films by sol-gel process

Sanjay S. Latthe, Hiroaki Imai, V. Ganesan, A. Venkateswara Rao

研究成果: Article査読

35 被引用数 (Scopus)

抄録

Wettability of solid surfaces is a crucial concern in our daily life as well as in engineering and science. The present research work describes the room temperature (27 °C) synthesis of adherent and water repellent silica films on glass substrates using vinyltrimethoxysilane (VTMS) as a hydrophobic reagent by a single step sol-gel process. The silica sol was prepared by keeping the molar ratio of tetraethoxysilane (TEOS), methanol (MeOH), water (H2O) constant at 1:14.69:5, respectively, with 0.01 M NH4F throughout the experiments and the VTMS/TEOS molar ratio (M) was varied from 0 to 0.97. The effects of M on the surface structure and hydrophobicity have been researched. The static water contact angle as high as 144° and water sliding angle as low as 14° was obtained for silica film prepared from M = 0.97. The hydrophobic silica films retained their hydrophobicity up to a temperature of 255 °C and above this temperature the films became superhydrophilic. The prepared silica films were characterized by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Fourier Transform Infrared (FT-IR) spectroscopy, humidity test and static and dynamic water contact angle measurements.

本文言語English
ページ(範囲)565-571
ページ数7
ジャーナルJournal of Porous Materials
17
5
DOI
出版ステータスPublished - 2010 10月

ASJC Scopus subject areas

  • 材料科学(全般)
  • 材料力学
  • 機械工学

フィンガープリント

「Ultrahydrophobic silica films by sol-gel process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル