Wireless proximity interfaces with a pulse-based inductive coupling technique

Hiroki Ishikuro, Tadahiro Kuroda

研究成果: Article査読

8 被引用数 (Scopus)

抄録

The rapid performance progress in processors and memory cores by technology scaling requires further improvement in interface bandwidth. However, interface bandwidth is not keeping up with the processing speed of the core and is becoming a bottleneck in system performance. To fill the performance gap, wideband lowpower low-cost interfaces are strongly demanded. A wireless proximity interface that uses inductive coupling is one such interface expected to be used for interchip links in high-performance 3D system integration. Inductive coupling interfaces use the magnetic near-field induced by micro-coils. The coils (channels) can be arranged in a dense array because magnetic near-field localizes in the proximity of each coil, and crosstalk between the channels is small. Therefore, inductive coupling interfaces are suitable for wideband low-cost proximity communication. An inductive coupling interface can also realize highly reliable communication with low power consumption. Evaluation systems developed to study the performance of inductive coupling interfaces have demonstrated the feasibility of the interfaces in a wide range of applications.

本文言語English
論文番号5594696
ページ(範囲)192-199
ページ数8
ジャーナルIEEE Communications Magazine
48
10
DOI
出版ステータスPublished - 2010 10月

ASJC Scopus subject areas

  • コンピュータ サイエンスの応用
  • コンピュータ ネットワークおよび通信
  • 電子工学および電気工学

フィンガープリント

「Wireless proximity interfaces with a pulse-based inductive coupling technique」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル